时间:2021-08-02 15:14:09 | 作者:王富贵 | 来源:赤峰汽车网

PES (Poly Ether Sulphone) Filter Cartridge

PES (Poly Ether Sulphone) Filter Cartridge

PES Cartridges are made up of Poly Ether Sulphone with uniform pore distribution to ensure maximum performance in bacterial retentions. It’s upstream &downstream polyester support ensures complete resistance to pressure shocks. Polyethersulphone membrane is hydrophilic in nature, hence it allows easy integrity testing for all applications where daily controls are required. The membrane possesses broad chemical compatibilities & contains no surfactants. PES Cartridges are produced in controlled environments & under stringent production conditions that ensure filter quality & cleanliness. These are assembled integrally by thermowelding. This process minimizes the presence of oxidization of substance & yield a durable filter cartridge suitable for extended use. Further, this can be sanitized by chemical agents or by inline steaming. PES and polypropylene, the unique two materials used in cartridge manufacturing are chemically inert, not shedding and biologically safe according to F.D.A., USP and EEC requirements for pharmaceutical and food contact use. The filtration area of each cartridge is as high as 0.7 m2. Therefore, it offers a high flow rate, low-pressure drop & long service life.

PES Membrane is inherently hydrophilic with excellent hydrolytic stability & chemical compatibility.

Specific pore size distribution for full bacterial retention to ensure sterile effluent even under process upsets.

End caps and connectors are sealed by thermal bond, free from binder.

Low pressure drop and high flow rate due to high filtration area of 0.7 m2 Per 10” cartridge.

Absolute rated.

Autoclave or in situ steam sterilization features.

Integrity test is possible.

FDA approved.

» Sizes   10”, 20”,30”40” Long  
» Micron Rating   0.05, 0.1, 0.2, 0.45 , 1 Micron  
» Filtration Area   More Than 0.7 m2 Per 10” cartridge  
» Outer Diameter   69 mm  
» Inner Diameter   28 mm  

Double Open Type (DOE Type)

Code 7S (226 O’ Ring Design / Bayonet)

Code 7F (226 O’ Ring Design / Flat)

Code 3S (222 O’ Ring Design / Bayonet)

Code 3F (222 O’ Ring Design / Flat)

» Filter Media   PES (Poly Ethersulphone) Membrane  
» Support Media   Polypropylene fiber  
» Inner Core   High strength polypropylene  
» Outer Core   High strength polypropylene  
» End Caps   High strength polypropylene  
» O Ring / Gaskets   EPDM / Buna N / Silicone / Viton  

» Pharmaceuticals  
» Food & Beverages  
» DI water Filtration  

FCIPES68-0.2-10 -E

FCI   PES   Diameter of cartridge   Micron Rating   Length Of Cartridge   Configuration  
Poly Ether Sulphone Pleated   68 MM   0.2 Micron   10″ Length   A – 226 O’ Ring With Bayonet Design  
0.45 Micron   20″ Length   B – 226 O’ Ring With Flat Design  
0.65 Micron2019年最强下海新件无弹窗_2019年最强下海新件最新章节_小说全文... 2021年最强下海新人无弹窗_2021年最强下海新人最新章节_小说全文... ,天天爱天天谢天天一 天天爱天天谢天天一 ,yy4808在线观看青苹果残影_6680万达影院青苹果_44800青苹果影视... yy4808在线观看青苹果残影_6680万达影院青苹果_44800青苹果影视...   30″ Length   C – 222 O’ Ring With Bayonet Design  
 40″ Length   D – 222 O’ Ring With Flat Design  
E – DOE Type